Photosynthesis Science Fair Project Ideas

Photosynthesis is the process by which plants, some bacteria, and some protistans use the energy from sunlight to produce sugar, which cellular respiration converts into ATP, the fuel used by all living things. The conversion of unusable sunlight energy into usable chemical energy is associated with the actions of the green pigment chlorophyll. Most of the time, the photosynthetic process uses water and releases the oxygen that we absolutely must have to stay alive. Project Ideas Create a diagram showing photosynthesis in a plant.Explain the cycle of photosynthesis. Chart it. Define the terms.Grow four of the same plants. Limit the amount of sunlight on two of the plants. Measure their height and fullness daily. Are the plants with limited sunlight different? How?Demonstrate photosynthesis using spinach leaves. If the student wants to work with plants, but a photosynthesis project does not appeal to him or her, there are plenty of other project ideas to explore. About These Science Fair Projects The science projects located here should be used as a guide to help your teen complete a science project to the best of their ability. In your role as a facilitator, you should feel free to share this project with them, but not to do the project for them. Please do not copy these project ideas to your website or blog, but post the link if you wish to share it. Recommended Books for Science Fair Projects There are other resources available for helping a student with a science fair. Here are some books for science fair projects specifically or just for conducting science projects in general. 365 Simple Science Experiments with Everyday MaterialsThe fundamentals of science are brought to life in a years worth of fun and educational hands-on experiments that can be performed easily and inexpensively at home. People who have purchased this book have called it easy to understand and great for the student who needs a project but they arent really interested in the sciences. The book is for both young and older students. The Scientific American Book of Great Science Fair ProjectsFrom creating your own non-Newtonian fluids (slime, putty, and goop!) to teaching a sow bug how to run through a maze, youll be astounded at the number of incredible things you can do with Scientific American Great Science Fair Projects. Based on the long-standing and well-respected Amateur Scientist column in Scientific American, each experiment can be done with ordinary materials found around the house or that are easily available at low cost. Strategies for Winning Science Fair ProjectsWritten by a science fair judge and an international science fair winner, this must-have resource is packed with strategies and pointers for putting together a winning science fair project. Here youll get the nitty-gritty on a wide variety of topics, from the fundamentals of the science fair process to the last-minute details of polishing your presentation. The Book of Totally Irresponsible Science: 64 Daring Experiments for Young ScientistsIntroducing 64 valuable science experiments that snap, crackle, pop, ooze, crash, boom, and stink! From Marshmallows on Steroids to Home-Made Lightning, the Sandwich Bag Bomb to Giant Air Cannon, The Book of Totally Irresponsible Science awakens kids curiosity while demonstrating scientific principles like osmosis, air pressure, and Newtons Third Law of Motion.

Evidence Based Practice On Patients With Type 2 Diabetes

Evidence Based Practice Research problem The article that I use as peer reviewed journal is â€Å" Semaglutide and Cardiovascular Outcomes in Patients with Type 2 Diabetes†. Type 2 diabetes is considered as the most common disease that affect many people. This is a condition that is associated with a high buildup of sugar in the blood stream. The symptoms are constant hunger, fatigue, lack of energy and frequent urination. At milder levels, the symptoms become severe and lead to the death of an individual. Importantly, it also increases the rate of the cardiovascular disease once an individual has been reported to have such symptoms. The cardiovascular diseases lead to a greater rate of complications in patients with type two diabetes and result in loss of life and also in the United States, it has been rated as one of the leading causes of death. Due to this reason, researchers have focused more on the development of appropriate drugs to improve the treatment of the condition. The article on â€Å"semaglutide and cardiovascular outcomes in patients with type 2 diabetes† provides beneficial knowledge to the health-care field. Literature review and hypothesis This particular research was carried out by the demand of the regulatory guidelines that deals with reduction of risks. The cases of cardiovascular risks among patients are have been reported to increase in the recent days. According to the article, it states that the regulatory guidance require being presented for rule outShow MoreRelatedEvidence Based Practice On Patients With Type 2 Diabetes Essay1662 Words   |  7 PagesEvidence Based Practice The article that I use as peer reviewed journal is â€Å" Semaglutide and Cardiovascular Outcomes in Patients with Type 2 Diabetes†. Type 2 diabetes is considered as the most common disease that affect many people. This is a condition that is associated with a high buildup of sugar in the blood stream. The symptoms are constant hunger, fatigue, lack of energy and frequent urination. At milder levels, the symptoms become severe and lead to the death of an individual. ImportantlyRead MoreEssay On The Road To Health With Prediabetes1205 Words   |  5 Pagesbut not high enough to be diagnosed as type 2 diabetes. Despite advances in medical technology, treatments, and diagnoses, uncontrolled diabetes continues to rise in the United States (US) (American Diabetes Association [ADA], 2016). Between 2012-2014, 33.9 % of the US population were diagnosed with prediabetes (Center for Disease Control and Prevention [CDC], 2016). According to the ADA (2016) in 2010 18.8 million of the po pulation was diagnosed with diabetes, 7 million were undiagnosed, comparedRead MoreThe EBP Change Project1294 Words   |  6 Pagesfurther diabetes education. The EBP change project was able to increase diabetes knowledge among African Americans with prediabetes by discussing risk factors associated with type 2 diabetes, proper nutrition and promoting health promotion behaviors. Currently, there is no diabetes education program or policy that’s in place targeting patients with prediabetes at the EBP change project site. Therefore, it is the project manager goal that the EBP change project site will begin to implement a diabetesRead MorePurpose Of A Nursing Research Study1646 Words   |  7 Pagesthat may impact patient life. This can be done by the research. The nursing research study has a tremendous influence on current and future professional nursing practice, thus rendering it an essential component of the educational process. The purpose of a nursing research study is to collect the information where the result may identify a solution to a problem. As a result, the research study would play a vital role in the nursing profession. Basically, there are two main types of research studies:Read MoreThe Management Of Diabetes During Primary Care1704 Words   |  7 PagesManagement of Diabetes in Primary Care: How to Improve HbA1c levels Ellen C. Gallman, RD, LD, RN, BSN Medical University of South Carolina The Management of Diabetes in Primary Care: How to Improve HbA1c levels Diabetes is the most common metabolic disorder in primary care, and if not managed properly, is the leading cause of cardiovascular disease, renal failure, retinopathy, and leg amputations (Buttaro, T.M., Trybulski, J., Bailey, P.P., Sandberg-Cook, J., 2013). Diabetes is a seriousRead MoreNursing Management Of A Patient Who I Have Looked After During My Placement1407 Words   |  6 Pagesthis essay, I aim to evaluate the nursing management of a patient who I have looked after during my placement. The setting is High Dependency Unit and the study is based on single day of my placement. I will be using a pseudonym to refer my patient to protect her identity and respect her confidentiality according to code: Standards of conduct, performance and ethics for nurses and midwives (2008). Full consent was obtained from the patient to conduct this study. Dorothy Smith is a 77 years old ladyRead MoreHealth Promoting Behavior Is Positively Associated With Diabetic Control Among Type 2 Diabe tes Essay1414 Words   |  6 Pagesassociated with diabetic control among type 2 diabetes patients. Open Journal of Nursing, 3(2), 274-280. doi.org/10.4236/ojn.2013.32037 1. Purpose of the article. What is the overall purpose of the article? Try to state this in one sentence. The purpose of this article study was to identify the association between practicing health promoting behaviors and diabetic control among Type 2 Diabetes Mellitus (T2DM) patients. 2. Type of article. Is this article data-based, clinical, review or editorialRead MoreA Research On High Risk Population851 Words   |  4 PagesOne of the prospects of research on high-risk population is the ability to recognize the disease and its outcomes, is to identify and implement of evidence-based intervention that will reverse or slow the progress of the negative outcomes of the disease (Ricci-Cabello, et al. 2013). Type 2 diabetes mellitus (T2DM) is a progressive and protracted disease related with substantial morbidity and mortality. African Americans (AA) adults have the highest occurrence of T2DM due to factors such as obesityRead MoreDiabetic Patients Should Be Educated About Diagnosis Of The Disease ( Powers )1730 Words   |  7 Pages Evidence-Based Recommendations Based upon analysis of existing scientific literature, the following ADA’s recommendations advised for all diabetic patients type 2—all patients should be educated about diagnosis of the disease (Powers, et. al, 2015). All treatment plans for diabetic patients should include education for nutrition therapy and physical. Other important education topics should be covered with individuals with diabetes type two are psychological concerns, behavior change strategiesRead MoreDiabetes : A Disease Characterized By High Levels Of Blood Glucose1548 Words   |  7 Pages Introduction Diabetes is a disease characterized by high levels of blood glucose caused by problems in insulin production, working of the produced insulin, or even both, which results in serious complications and ultimately death (National Diabetes Education Program, 2007). Type 2 diabetes, however, occurs when the body cannot produce enough insulin or make use of insulin the body produces effectively. Report shows that 29.1 million or 9.3% people in the U.S. have diabetes, 21.0 million diagnosed

Global Management Strategy - Innovation and People

Question: Discuss about the Global Management for Strategy, Innovation and People. Answer: Introduction Marketing has undergone a tremendous change in recent years with the increase in globalization and digitalization and in age of disruptive technologies. Today, number of products has increased due to competitors crossing geographies and also product life cycle is getting shorter. As a result of all this, it becomes mandatory for marketers to study the market requirements and frequently come up with the new product developments. In recent times, there has been a paradigm shift from push form to pull form of marketing. With the increase government regulation, customer awareness and focus on corporate social responsibility, organizations have changed their strategy to societal marketing. Earlier, companys focuses on selling the products to customers based on their targets. They were not much sensitive to if the products are aligned to customer requirements. As a result, there were many cases of misspelling also specially in Finance sector where products are being sell without considerin g the risk appetite. But with this new concept of societal marketing, company focuses on assessing the customer requirements and produce better products that aim towards customer interest and welfare of the society. This marketing also aims to educate the customers and spread awareness (King, Mcvey, Simmons, 2000). Also, these days companies also have a lot of data to analyze and to understand customer requirements in a true sense. All the organizations engage customers on facebook, twitter and many other sites. The purpose of this is marketing, publicity and to gain insights about customer preferences and requirements at the same time. There is huge amount of data that is gathered from these social media tools and then there are software technology of analytics which when applied on a he amount of data helps to find the trends. Such trends help the organizations to make their products better, do a more targeting selling and to check the feedback and acceptance of their products among customers. Societal marketing will definitely be accepted by everyone in the society as the focus is more on society welfare in this approach. Societal marketing would also help to narrow down the gap between consumers expectations from the organizations and organization understands of consumers expectations. It is a win-win situation for the while society including business firms. Analysis The social marketing also helps to improve the image of the corporate among the customers as it is something more than profit making approach of marketing. While earlier approach of organizations was making profits by selling aggressively, this type of marketing focus on selling products that are more aligned to customers need and also helps in the welfare of the society in the long term. For the welfare of the society and increased regulations, organizations these days have a spate corporate social responsibility (CSR) unit. These CSR units works on the social responsibility of the corporations towards the society. For example, Companies will organize marathons for awareness about several issues (Chattanonon, Lawley, Trimesoontorn, Leelayouthayothin, 2007). Many companies are also focussing on CSR in Australia also. Myer and Qantas Airlines are in headlines from long time about their societal marketing. Myer operates in retail segment while Qantas is the first Australian airlines. Myer sells broad range of accessories, hardware, cosmetics, grocery, furniture, toys, books, clothes. Myer takes various initiatives for the welfare of the society. Both the organizations have changed their marketing mix in order to provide more value to customers. As a part of their social responsibility, they also give much importance to customer feedbacks. Customer feedbacks and complain is taken very seriously in both the organization (Bryan, Meyer, Campbell, Haris, Lyle, Summers 2013). Myer start initiatives quite frequently. It also started systems of taking suggestions from customers and award the best suggestions. Both Have reward card system. Qantas has also identified its carbon footprint and now collaborating with various environmental organizations across the world to reduce its carbon footprint. With the help of technology, they have drastically reduce the use of paper from their operations. Initially, these used to serve plastic bottle of water in flights to each passenger which also they have changed. Now, they offer water in glasses so as to consume less plastic (Meyer, 2004). Qantas publishes its report about its operations and CSR initiatives every year to be transparent with the consumers. Qantas also uses twitter to encourage feedback from customers and constantly making changes so as to provide better experience. Myer also have identified its social responsibility. They are also helping the environment by making their operations leans and reducing the consumption of paper (Meyer, 2004). Also Time to time, these companies organizes campaigns, social media events to bring awareness among customers towards the environment. In short, all these actions of the corporate are helping the whole society, people, corporate as well as environment. Myer also have strong impact on the life of the people by focusing on the well being of the community. They invest heavily in the development of local communities and thus makes a impactful contribution in the life of the people. Myer also has a philanthropic fund that is maintained purely with the intention of helping the societies in their well being (Dundon, Wilkinson, 2014). Labeling and packaging has become very important these days and all the organizations should spend time on these aspects also. Packaging is one the important aspect to attract customers and also it can improve the shelf life of the products. Also, Labeling is required to give exact information what are the ingredients that goes into making this products, the various information about the product, this product is suited to which group. If the labeling is good and informative, it will help customers to identify themselves more with the brand and brand will also be able to build the trust. There is separate state framework for this where it has been clearly identified what all information manufacturers need to share with customers. There was issue recently when country of origin missing in many products. However, later this becomes a rule. Australians prefers to eat more Australian origin food to support local farmers and also as well as to continue food manufacturing in Australia (Kotl er, Burton, Deans, Brown, Armstrong, 2015). Also, Companies are also adopting latest packaging techniques that tend to provide better packaging with much less use of paper and other raw material. Labelling and packaging also have a role to play in societal marketing. Honest labeling will help customer to take better decisions about what they want. Conclusion To conclude, it has been discussed that organizations are changing their marketing strategy worldwide in order to provide more value to customers by becoming more sensitive to their requirements and this is exactly the concept of societal marketing. Australian companies are also not untouched by it. There are many organizations in Australia that are using societal marketing to provide products to customers aligned to their own needs. This also prevents any mis selling and thus able to build better trust between corporate and citizens and thus helps in the welfare of the society. There is no doubt that recognizing social responsibility and then taking initiative to fulfill responsibility also demands investments but it is worth to gain the acceptance in the society. It also helps in improving the image of the corporates among the people and thus results in increase in sales although this is not the motive but this is the result of the honest CSR activities. Bibliography Bryan, B. A., Meyer, W. S., Campbell, C. A., Harris, G. P., Lefroy, T., Lyle, G., ... Summers, D. M. (2013). The second industrial transformation of Australian landscapes.Current Opinion in Environmental Sustainability,5(3), 278-287. Chattananon, A., Lawley, M., Trimetsoontorn, J., Supparerkchaisakul, N., Leelayouthayothin, L. (2007). Building corporate image through societal marketing programs. Society and Business Review, 2(3), 230-253. Dundon, T., Wilkinson, A. J. (2014).Case Studies in Global Management: Strategy, Innovation and People Management. Tilde Publishing and Distribution. King, B., McVey, M., Simmons, D. (2000). A societal marketing approach to national tourism planning: Evidence from the South Pacific. Tourism Management, 21(4), 407-416. Kotler, P., Burton, S., Deans, K., Brown, L., Armstrong, G. (2015).Marketing. Pearson Higher Education AU. Meyer, P. (2004). Rural Agricultural Shows in New South Wales, Australia: Marketing Events to Address Decline.Proceedings of the New Zealand Tourism and, 246

Three Branches Of Science Essays - Branches Of Science, Chemistry

Three Branches Of Science Three Branches of Science Andrew Rambo Ms. Gardener 10th Grade Biology September 11, 2000 Science is such a wide area that it is divided into branches. Biology, chemistry and geology are three of these branches. Each branch of science are very different. They use many of the same techniques in the study of the materials in their area of science, but are very different materials. Biology is the study of life and living things. The French naturalist, Jean Baptiste, introduced the term, biology, in Germany during the 1800's. Biology is also divided into branches. Zoology, botany and anatomy are three of the major branches. Biology studies the life of particular species and their behavior, development and history. What makes biology different from the other branches of science is that it studies living things. Chemistry is the branch of science dealing with the properties, composition and structure of substances and the changes they undergo when they combine or react under specific conditions. Chemistry deals mainly with components of material origin. Organic chemistry is the only branch of chemistry defined as the study of substances produced by living organisms. Physical chemistry is concerned with the physical properties of materials. Chemistry deals with the states of matter. Through experimentation a chemist defines a material by how it reacts under many different situations and how it reacts to other materials. From the earliest recorded times, humans have observed chemical changes and have speculated at their possible causes. By following the history of these observations and speculations the gradual evolution of the ideas and concepts that have led to the modern science of chemistry can be traced. In recent times, a great deal of research has been at the atomic and molecular levels . The study of their reactive characteristics has led to great advances in the use of the power of their reactions in the creation of nuclear power. Geology is the science of the Earth's history, composition and structure. Geological observations have been made since ancient times. The branches of geology are divided between the study of the Earth's landforms, petrology, geochemistry, geophysics, structural geology and paleontology. Geology encompasses the study of the Earth's landforms and it's surface features but is also concerned with the structure and inner parts of the planet. The focus of applied geology is to search for useful minerals, stable environments for human constructions and identify natural hazards. Oceanography is a branch that studies the ocean floor, mapping and measuring the Earth's surface and searching for clues to the origin of Earth. As you can see, these three branches of science are very different. They each involve the research of very different materials present here on Earth. They study living and non-living substances. The common thread is the science focused on the goal of finding and understanding these materials and how they can make life better for us. Scientists have searched for and studied various materials found on Earth. By studying the reactions in different environments, all branches of science have been able to develop the resources found on Earth to improve the status of living in society today. Each branch of science is focused on a grouping of materials that are very different in their characteristics, but the scientist's goals are very much the same. They seek to come to the best understanding of the possibilities that each offer to the human race. Bibliography Microsoft? Encarta. Copyright? 1994 Microsoft Corporation Copyright?1994 Funk & Wagnall's Corporation Encarta? World English Dictionary [North American Edition]? & (p) 1999-2000 Microsoft Corporation Encyclopedia?1988 published by New York Post Press Bibliography Bibliography Microsoft? Encarta. Copyright? 1994 Microsoft Corporation Copyright?1994 Funk & Wagnall's Corporation Encarta? World English Dictionary [North American Edition]? & (p) 1999-2000 Microsoft Corporation Encyclopedia?1988 published by New York Post Press Science

Your Time is Limited, So Don’t Waste It Living Someone Else’s Life A Quote by Steve Jobs free essay sample

â€Å"Your time is limited, so don’t waste it living someone else’s life. We will write a custom essay sample on Your Time is Limited, So Don’t Waste It Living Someone Else’s Life: A Quote by Steve Jobs or any similar topic specifically for you Do Not WasteYour Time HIRE WRITER Only 13.90 / page † Here is how I interpret what Steve Jobs was saying: Don’t drink just to make your friends, partner or anyone else happy, because then you’re just living someone else’s life. Don’t go places your friends’ want you to just to please them, because then you’re living someone else’s life. Don’t act a certain way and do things just because your friends want you to just so they will accept and like you, because then you’re living someone else’s life. Don’t dress and value what your friends tell you how you should dress and what you should value, because then you are just living someone else’s life. When you do things in the hope of pleasing someone else, making them happy, you are living someone else’s life. This doesn’t mean that you live with total disregard or concern of others. If you’re married or in a committed relationship, you pay attention to your partner, you spend time together. You are flexible and do things to make your partner happy. If you have children, you spend time with them, teach them, educate them and grow together. If I was to go to a friend’s wedding I will dress appropriately wearing a nice dress. If I am hired by an employer or accept a job, I will do the job I am hired to do. If I say I’m going to do something then I do it, that isn’t living someone else’s life, that is being responsible. This quote is important for people to know, because doing what makes you happy is a much better way to go through life then doing what others think is right.

buy custom Management Planning Tools essay

buy custom Management Planning Tools essay Singapore Zoo lies with twenty eight hectares of land, in the Upper Selectar Reservoir. The reservoir lies within central catchment area, which is heavily forested. The zoo contains at least three hundred and fifteen animal species, and attracts more than 1.6 million visitors every year. The Zoo has always followed the modern pattern of displaying animals. The zoo displays animals in an open and naturalistic exhibit, having moats, barriers and glass between visitors and animals. The major activity at Singapore Zoo is viewing wildlife. The attractions include the Australian outback, which includes animals like Kangaroos, birds that can swallow metallic object and lizards having accessories around their necks. At the outback, visitors can encounter roos, grey kangaroos, dandy marsupials and agile wallabies skipping freely. there are rustic shed at the walkthrough sheds, showcasing a collection of educational interpretive and amazing reptiles. Another attraction is the critters longhous e, which houses curios critters, Goeldis monkeys, mousedeers, Kinkajous and leopard cats. at the cat country show, visitors come in close encounters with big cats like leopards, lions and the jaguar. In addition to this, Elephant of Asia is a show that recreationists can not fail to marvel at. It showcases the rich exotic Asian colors with the Asian elephants. The Singapore Zoo is also flashed up by the presence of the Orangutan Species and proboscis monkeys. there are educative information on these animals, that will leave the recreationist more knowledgeable on wildlife species, lifestyle and culture. Visitors also have the opportunity to experience Africa in the zoo, with the presence of Ethiopian baboon, the Hamadryas baboons, African lions, zebras, African wild dogs, Cheetahs, Giraffes, and White rhinos, all present at the wild Africa attractions. Because the zoo is a family recreation center, children have the opportunity to marvel too. Despite the above attractions, children can also experience the rainforest kidzworld which includes a variety of exhilarating activities. Rainforest contains educational and fun activities such as pony rides, horse carriages, and unique picturesque. Because the zoo attracts many visitors, the management is bound to face several issues relating to visits to the park. The major issue at the zoo is overcrowding. The park attracts many visitors that are sometimes beyond its carrying capacity. Over crowding causes many issues that both the management and visitors cannot ignore such as pressure on the available attractions and exceeding the carrying capacity. Over crowding also influences poor disposal of litter. It is difficult for visitors to allocate litter bins when people are crowded, which in turn influences visitors negligence and lack of responsibility towards disposing litter. Despite having litter bins, some visitors leave trash everywhere, which is a health hazard to the animals. Poor disposal of litter and trash may lead to the exposure of toxic substances to the air, leading to air pollution. Animals may swallow the litter, which contains a harmful substance such as pesticids and oil. In the long run, littering endangers the surrounding environment, as well as the stability of the park, especially the safety of animals. The management can use several approaches to manage these issues for the visitors benefit, as well as the benefit of the animals. In the planning and management approaches, Singapore Zoo management can utilize a number of available tools that make park and zoo management easy. These tools include the Recreation Opportunity Spectrum (ROS), the Limits of Acceptable Change (LAC), Visitor Activity Management Process (VAMP), Visitor Impact Management (VIM) and Visitor Experience Resource Protection (VERP). Visitor Impact Management This management tool covers a variety of techniques and processes for supervising visitors, their impacts and their activities in specific areas (Buckley, 2004). Public and private organizations in the tourism sector use this tool for managing natural areas that require special protection. VIMs focus is on the visitor impacts on specific locations. This management tool, just like the visitor Activity Management tool, relies on specific methods for its application. The methods include education, track hardening, time mechanisms, behaviour management and other design led solutions. VIM processes recognizes the standards and indicators for mangers to obtain desired goals. the managers at Singapore Zoo would need to state the zoos goals, in order to utilize this tool. The goals can range on the type of resources, activities, and the recreationists. Therefore, if the goal of the zoo is to maintain the animals health or increase visitors per year, the management can utilize VIM to help the zoo achieve this goal. In this aspect, the tool resembles Limits of Acceptable Change, though its techniques are simpler than those of LAC, and were the first ones to be developed. VIMs techniques are more familiarized to respond to the perceptions of managers instead of the stakeholders. Additionally, it is easy to incorporate VIMs processes for participation models. As stated earlier, VIM is most applicable in protected areas management. Despite this, it is compulsory to apply formal frameworks to influence its positive performance. One of the frameworks is VAMP, which includes a variety of steps. The steps include; Setting objectives and terms of reference, data analysis and development of databases, developing an alternative to concepts f visitor activities, plan documentation and finally, implementation. These processes can extend to include other steps, especially in areas with broader analysis scales. The additional steps would include reviewing and identifying issues, indicator selection, resources inventory, indicator standards specification, iterative monitoring process and implementation, impact versus standards comparison, and management alternative identification. Visitor management is a key concept to the functioning of the Department of Conservation (DOC) strategy, as it fosters utilization of historic and natural recreational resources. The DOC visitor strategy allows the managgement of design the management process by seeking to identify values, assessing potential visitor impacts, responding and monitoring the impacts and developing an ideal management regime. The focus of the Doc is to develop a standard process, which identifies key visitor impacts, especially on the values of the location. to do this effectively, the strategy employs the help of other management agencies like Geographic Information Systems. The Visitor Impact Management (VIM) addresses problem conditions, management strategies and potential causal factors (Pigram , Jenkins, 2006). The tool employs the same methods to assess and identify the effects as well as the causes. VIM aids managers in providing information that helps them control or reduce undesirable behaviour from visitors. In addition to this, VIM also suggests several approaches to that construct a scientific understanding of visitors impacts, nature and causes. It looks at impact relationships, activity-specific influences, impacts to varying tolerance. Lastly, VIM provides a means of managing or decreasing impacts of undesirable recreational use. East Coast Park managers could use this strategy to prevent or reduce the impacts of littering. Because it provides alternatives to the carrying capacity concept, the managers could use it to plan on the parks; carrying capacity in order to prevent overcrowding. Application the zoos management could use this tool to ensure that over crowding does not affect allocation of recreational activities. The framework helps the management develop various options for services and activities for visitors, and provide advices on activity approval plan. The zoos management would use tis framework to plan and ensure that the number of visitors to the park at any point coincides with the number of available resources. VIM should always be linked to the objectives of the overall management site. Its analysis and investigation sites should recognize the cause of impacts in order to allow the set up of deeper research and monitoring framework. VIM provides a means of managing or decreasing impacts of undesirable recreational use. Singapore zoo managers could use this strategy to prevent or reduce the impacts of littering. Because it provides alternatives to the carrying capacity concept, the managers could use it to plan on the zoo carrying capacity in order to prevent o vercrowding. In the past, Visitor Management was based on the interpretations and perceptions of managers on the ground. In addition to this, agencys policies and legislation drove its operations. Presently, stakeholders involvement is possible for reviewing relevant objectives, selecting central monitoring standards and indicators and initiating input into related strategies for management. This stakeholder involvement is beneficial in instances where there are suitable indicators of unacceptable consequences. In this case, the input of the public is able to identify relevant stakeholder perceptions on specific issues. In this respect, traditional VIM was similar to the processes of LAC. a Buy custom Management Planning Tools essay

To What Extent Does a Director's Duty Under Section 175 Companies Act Essay

To What Extent Does a Director's Duty Under Section 175 Companies Act 2006 Continue Post-Resignation - Essay Example The Company Act 2006 brought up a statutory code of general duties of directors; this introduction was appearing in the UK’s Company law for the first time. The main purpose of this legislation was to enhance the general understanding of the legal duties of directors. The duties of the directors established in the Act are based on certain equitable principles and common law rules. The interpretation of the statutory duties in the future is required to be according to the development of those principles of case law.2 The director’s duties are not owed to the shareholders but rather to the company. The Act stipulates the duty of each director to include: a duty to foster company’s success as the director deems it in good faith; a duty for the director to avoid any conflicts of interest; a duty of non-acceptance of benefits such as secret commissions and bribes; a duty to act within the terms of powers granted under the constitution of the company; a duty to exercis e reasonable diligence, skill, and care; a duty to declare any interests in the company’s transactions; and a duty to effect independent judgment.3 . In addition, the Act incorporates expressly long-standing equitable doctrines in order to provide remedies for director’s breach of duties, as noted for example in the case of Boardman v Phipps.4 Of most interest in this discussion is section 175 of Companies Act 2006. In reference to section 175 Companies Act 2006, this discussion will consider the extent to which a director’s duty will continue post-resignation. In particular, section 175 of the Companies Act 2006 deals with the director’s duties concerning conflict of interest (actual and potential). The main rationale of this provision is to codify the subsisting principles of case law and to develop parallel principles to the existing ones. Section 175 (1) state that a company director must avoid situations in which he has, or can have, conflicts of int erest either directly or indirectly, or this interest and that of the company may conflict. Section 175 (2) provides that the duty to avoid conflicts of interest applies particularly to the exploitation of any opportunity, information, or property.5 However, section 175(3) provides that this duty shall not apply to conflicts of interest arising from an arrangement or transaction with the company. Additionally, section 175(4) states that this duty will not be considered infringed if: the directors have authorised the matter or the circumstances cannot be reasonable considered as giving rise to conflicts of interest. In section 175(5), the Act provides that the directors may give the authorisation in the following situations: where the company is a public constitution and the provision enabling authorisation by the directors is contained in its constitution, or where the company is a private company and its constitution does not validate authorisation of matter. Besides, section 175(6 ) states that authorisation can be effective if: agreement to the matter was made without voting or its agreement could have

Regional Transportation Commission of Southern Nevada Research Paper - 2

Regional Transportation Commission of Southern Nevada - Research Paper Example It deals with the issues concerning its organizational culture that encourages excellence by shielding itself from a nefarious effect of political influence which can negatively affect its organizational objectives of providing an efficient transport system for the region's population not only today but fifty years from now. It had adopted transparency in all its transactions with the publication of all relevant data and information on its Web site regarding its activities, agenda and future plans so that all the agency's community investments are maximized. The paper also gives a brief background on the dynamic region of southern Nevada and how the RTCSN plays an important part in its vital transformation. The agency is well managed as an empowered organization through its internal advocacy (like re-organization) and external advocacy (in cases like plans for transport systems such as building new roads) to minimize traffic congestion and future transport challenges. Introduction Th e region of southern Nevada includes the five counties of Clark, Esmeralda, Nye, Mineral, and Lincoln; this is incidentally also the region where the majority of the state's population live due to the rest of the state being an inhabitable desert. This region encompasses the Las Vegas Valley and the region is a major educational center of the area. Moreover, most of its economy is based on the tourism-related industries of gaming (gambling), leisure, vacation (senior retirees), hotel, hospitality, and travel. This means there is a lot of movement within this region, which is a reason for existence of the Regional Transportation Commission of Southern Nevada (RTCSN) to regulate and plan all the transport-related concerns of this region with regards to this sudden population expansion due to the influx of tourists (both local and foreign), migrants (temporary workers seeking jobs, mostly in construction) and those potential retirees attracted by the warm climate, no state taxes and na ture attractions at Lake Tahoe. It is estimated Nevada entices some five million visitors annually with revenues of about US$ 6 billion (Leong, 2008, p. 2). Regional Transportation Commission of Southern Nevada is the agency mandated by state and federal governments for maintaining a continuing, cooperative and comprehensive (3C) transportation planning process. The RTCSN has been re-named (in 1981) as the Metropolitan Planning Organization (MPO) for southern Nevada in view of its expanded responsibilities. This new agency has to operate using the same modern management tools used in all big corporations and is the subject or topic of this paper. Among other things, it has to operate within budgets, use organizational skills to attract the best-qualified people to its ranks and obtain the cooperation of the riding public to achieve its goals of efficiency and sustainability (RTCSN, 2012, p. 1). Discussion The RTCSN has to be operated like any private enterprise in order to maximize all the resources given to it and achieve its mission of sustainability such as maintaining the air quality through encouragement of Club Ride Commuter Services that promotes walking, biking, pooling of cars and vans, and in the use of the mass transit system, which it operates and carries about 64 million passengers per year.  

Organizational Theory Design and Change Essay Example | Topics and Well Written Essays - 250 words

Organizational Theory Design and Change - Essay Example Supervisors and managers define the goals and hold meeting with the employees regarding the amount of effort and budget needed to accomplish those goals. The managers take care of every employee individually and listen to their problems. Dealing with customers with efficiency and skilfully is an important part of my workplace culture. All the employees share a set standard of rules and respect each other’s privacy. Their good behavior is not only a source of competitive advantage but also increases organizational effectiveness by enhancing its reputation in the market. The deadlines are met efficiently because the projects’ tasks are distributed among the team members properly. The best thing with my workplace culture is that the employees use technology based tools to communicate with each other and the supervisors, and also with the consumers and the stakeholders. This increases trust between all the parties. Hence, the overall culture at my organization is very frien dly, healthy and motivating which keeps the employees working hard enough to achieve the organizational goals and objectives, and increase productivity.

International Federation of Accountants Code of Ethics

International Federation of Accountants Code of Ethics Code of Ethics is essential for both accountants and auditors as they hold positions of expectation that the community rely on them and the capability. The Code of Ethics is regulated by International Federation of Accountants (IFAC) at international level. Due to the company failures such as Enron and Equitable life, ethical behavior and independence has become more important. The Enron case clearly demonstrates the value work of IFAC. (ACCA, 2002) Therefore, IFACs Code of Ethic is broadly defined as code of conduct based on a set of moral principles or values that indicates how an individual should behave. (Velayutham, 2003) Through this, if an auditor is incompetent, the parties to the contract will place little or no value on the service provided. (Messier et al., 2007).Furthermore, auditors are required to be independence to apply unbiased judgment and objective consideration to establish facts in giving an opinion. It is essential because the users expect the auditor to have an unbiased viewpoint when forming opinion on the true and fairness of the financial statement. If the auditors are not independence, then the value of audit is lost. (Gomes, 2010) [Online].It is vital to provide assurance services as it can increase confidence of users of the information and to avoid conflicts of interests that may occur towards the auditor. 2.0 Main report 2.1 Critically evaluate of the role of IFACs Code of Ethics for professional accountants in strengthening independence of auditors. Over these years, IFAC has been revising a newer Code of Ethics to clarify requirements for all professional accountants and to enhance the independence of auditor. (IFAC, 2009) [Online].This Code of Ethics are follow up and practiced by its members until it becomes a system in the organization.(Ravendran,2006) [Online]. Principles-based approach is remained in the revised Code of Ethic and it establishes a conceptual framework for professional accountants and external auditor to follow. This is to make sure they are compliance with fundamental principles of professional ethics. It is important for fundamental of principle to remain the same, as it would be more flexible for all professional accountants and the external auditors. (Ward, 2006) [Online] The IFAC Code of Ethic has constantly revised to meet the changing needs of the profession and the expectations of stakeholders in Malaysia. (MIA, 2006) [Online].Therefore IFAC Code of Ethic is set as a good example to follow because of its holistic approach that considers many aspects of the issue. (Gomes, 2009) [Online].External auditors to find out possible threats and evaluate how it could affect the audit are using conceptual framework. They have to apple safeguards on the identified threats to reduce them to an acceptable level. (MIA, 2006) [Online] Furthermore, auditors play an important role to provide a high-quality financial statement because any loss in carrying out their work will give a bad impact on investor protection and confidence. For example, many auditors failed to give their opinion leading to compromising the shareholders of public listed companies. (Izma, 2009) [Online] .As a result, independence of auditors is affected. In solving this kind of situation, auditors will need to follow the fundamental of principles to reduce this threat. (MIA, 2005) [Online] By applying a principle-based approach, it can also help to standardize the IFACs Code of Ethic globally. Through standardizing the international standards, the auditors will have high quality standards in auditing the financial statement. (Ward, 2006) [Online].If each country standardized the preparation of financial statements, making it flexible for cross-border securities listing globally. This will enable the company for a better flow of resources, using it systematically. (Kumar, Porwal, 2003) [Online] .Therefore opinion form by auditors will be more credible and reliable in ensuring auditors to be more independence. On the other hand, the behavior of a human cannot be justified by just following the IFACs Code of Ethic. This is because personal behavior cannot be control and it depends on how they want to behave. (MIA, 2006) [Online].For example lack of ethical code, especially one client may jeopardized another clients business due to the financial difficultly they faced.(Gomes, 2009) [Online] The reasons why auditors cannot control themselves, probably due to the characteristic of the auditors are self-centered, greedy and unprincipled, thus this will create a self- interest threat for the auditors.( Jackling et al., 2007) As such, it is not good to understand the principle only, the knowledge of ethical code need to be apply. (Gomes, 2010) [Online].If not independence of auditor will be influence and then nobody would be able to trust them just like Arthur Anderson. Due to the cases like Enron or WorldCom, which ended up as a fraud, IFACs has revised stronger ethical code and stringent rules that a company must follow. However, the revised IFACs Code of Ethic cannot be perfect all the time. Somehow, loopholes can be found, as it may not fully capture the culture, belief and practice the code and it will make auditors to be unable to enhance independence. (ACCA, 2009) and external auditors may not adapt to this standards as there are changes to the ethical code. It can also make mistakes as the environment is changing, so does the culture and the personality of the auditor as well. Therefore, without a proper guidance, certain parts of the organization may interpret the code differently and IFACs Code of Ethic cannot promise that very country or auditor may process the ethical code. For example as the culture in the world is changing so as the behavior of an auditor and for that auditor may do what they want, as the Code of Ethic is not included in the law system. In general, by maintaining the same code is not possible, as it has to change consistently. (Pflugrath et al., 2007) 2.2 Evaluate the important of maintaining principle-based approach in the Code of Ethics. Many corporation failures has shows the need of principle- based approach is essential. The suggested ways for IFACs Code of Ethic to strengthen the independence of auditors are by having a principle-based approach, as it is flexible and easy for the auditors and accountants to adapt. With a strong principle-based, this will enhance the auditor to perform a high quality standards of auditing in making decisions and the public would have more trust towards them (IFAC, 2009) [Online]. By having a principles- based approach, problems it maintaining will be reducibly and there are ways of resolving it. (MIA, 2008) [Online] Furthermore, the IFACs body has agreed that principle-based are better compared to rules-based approach as threats and safeguards better serves the public interest, which cannot provide for all circumstances. (Bagshaw, 2006) [Online].As such, the Code of Ethic has been revised in principles- based approach primarily to encourage auditors to make a high quality judgment(MIA, 2006) [Online]. Therefore, assurance is critical in making sure that their judgments are ethical enough as the auditors and accountants holds these responsibilities. (Haron.H et al., 2010) Other than that, a principles- based approach can adapt to the changes of the environment. This is because every country has a different culture and this culture will generally affect the behavior of that person. Therefore, with principle-based, it can minimize standards behavior for each auditor and accountant globally. (ACCA, 2009) and therefore it is important to maintain a principles-based in the IFACs Code of Ethic. Moreover, with the high quality of ethical code, auditors can make a good judgment and this will avoid them from having a financial scandal. (Ismail et al., 2010) Somehow, some aspects that may considered as a threat towards a principle-based approach. External auditors and professional accountants that are use to comply with rules- based in Code of Ethics find themselves in a difficulty to switch to principles- based. The most important concern is whether a purely principle-based approach is strong enough to deal with a complicated transactions.(Yong, 2004) [Online].Due to the different culture in every country International codes such as the IFACs Code cannot fully comply with basic principles and practice. (ACCA, 2009) The fact is that auditors and accountants will need to apply judgments according to the principles, which is impossible because Code of Ethic cannot include all situation and dilemmas and by applying judgments blindly, auditors independence are affected. (Gomes, 2009) [Online] Despite that, every now and then judgment are use to manipulate financial outcomes so a strong ethical behavior and commitment is required for the auditors to avoid temptations from resist client pressuring. (Yong, 2004)[Online] Besides that, the lack of clarity in principle-based approach as ethical code can perceive to be to technical jargon. As such auditors will have a difficult time to understand certain parts especially when the ethical code is translated, auditors finds themselves that the meaning become weaker thus auditors will find it hard to revise the Code of Ethics and because of this ethical code may not be widely used all over the world. (MIA, 2005) [Online] (ICAEW, 2006) [Online].Therefore every country needs to adjust to have a simpler Code of Ethics. 2.3 Recommendation In general, all companies differs from one and another in terms of functional operations, its legal systems, institutional base works and cultures, therefore it is critical that every organization must have good corporate governance for survival. Hence corporate governance is another way to enhance the independence of auditors besides having Code of Ethics. The objectives are to make sure that companys management is organized care and certain requirements that auditors and accountants must comply. Other than that, corporate governance systems are to make sure that threats to independence do not happen. (ICAEW, 2001) [Online] As audit committee are parts of the corporate governance, it is important for them to monitor the external auditors work by checking the financial report. By doing so, external auditors assurance will be improved. Besides this, audit committee can give some opinions to external auditor especially when problems occur. (ACCA, 2009).Therefore, with the help of audit committee, financial report would be more reliable. Moreover, audit committee can also review the timing and nature of reports as well as the findings of the external auditors. (ACCA, 2009) Hence, this will be able to enhance the independence of auditors Besides this, Continuing Professional Development (CPD) is another good substitute besides Code of Ethics. This program is great to ensure auditors and accountants are updated with the market developments and changes affecting the accountancy profession and the auditors. Further, it helps the auditors to maintain and raise standards to professional judgments thus this will give auditors to be more up to date in the Guide of Professional Ethics. Through CPD, auditors will have the advantage to improve the capacity to exercise the highest standards of professional judgement. (ICAEW, 2010) [Online] CPD also provides information, support and guidance towards the auditor thus auditors are more confident in making a good decision without affecting the financial report. (ICAEW, 2010) [Online] By adopting this new approach, auditors will be able to follow up with current issue, which can affect their professional works, and to be committed in the job as they are responsible to the clients, stakeholders and the employers. (MIA, 2006) [Online].Finally, CPD will help them to be more knowledgeable and will enhance them to develop higher level of quality standards (MIA, 2007) [Online] 3.0 Conclusion Overall, it is important that IFACs Code of Ethics is revised every few years to make auditors and accountants are able to adapt with the changes made in the Code of Ethic. Ethical code is needed for the auditors and accountants as the public rely on them to perform the audit work efficient and effectively. Due to this, maintaining a principle-based is in need for every auditors and accountants as it is more flexible and thus it is globally used. However, there are still some negative aspects of ethical code, which auditor finds it difficult to comply with but somehow they manage to resolve it. As such, it is important that auditor and accountants knows when to apply the ethical code and not just understanding the principle only. Nevertheless, by having a good judgment, auditors will be able to make a good decision without getting influence. Therefore, with a strong ethical behaviour, auditors will be able to give a reliable and credible financial report and as a result, independence of auditors can be enhanced.Apart from this, it is essential, that every country will be able to adopt the IFACs Code of Ethics, as it will give high quality standards in the financial statement. Ethical Code cannot guarantee ethical behavior or resolve all dispute ethical behavior should result from a personal commitment to engage in ethical practice. Audit committee and CPD can also help to enhance the independence of auditors. Lastly, Ethical Code is an essential element of the surroundings in which auditors work and it is important that proper guidance to be given to them.

Pride in Things Fall Apart, by Chinua Achebe :: essays research papers

In the novel Things Fall Apart, by Chinua Achebe, the main character, Okonkwo, has a lot of pride. There is a well-known aphorism, ?Pride goes before a fall.? Through Okonkwo?s hard work, he became a great man, with a sense of pride and haughtiness. He then suffered a loss of pride, which ultimately led to his down fall and even his suicide. So, through Okonkwo?s actions, Achebe suggests that excessive pride can lead to down fall. For my first point, I am going to start with a joke: ?One day there was an airplane flying Bill Clinton, Bill Gates, Bill (a kid), and Billy Gram. Something went wrong with the plane, and so it had to be abandoned. The pilot strapped on a parachute and said to the passengers, ?There are only four parachutes, and I am taking one.? Bill Clinton grabbed the second and said, ?I am the most important man, and my country needs me, so I am taking one, too.? Then, Bill Gates grabbed the third one and said, ?I am the smartest man in the world, and my people need me.? After Bill Gates left, Bill (the kid) was just looking at the last parachute, when Billy Gram said, ?I am old and you are young, and you have your whole life ahead of you, so take the last parachute.? After a little while, Bill looked up at Billy Gram and said, ?I was not thinking about that, it is just that the smartest man took my back pack.? As you saw from the joke and the book, both Okonkwo and Bill Gates were full of prejud ice pride. Both thought they were great men, and saw others as inferior compared to them. But their pride led to their destruction. Second, Okonkwo?s pride was greatly bruised while attending a great warrior?s funeral, named Ezeudu. It was when ?Darkness was around the corner? (page 124), when Okonkwo?s life took a sharp turn down hill. ?Guns fired the last salute and the cannon rent the sky. And then from the center of the delirious fury came a cry of agony and shouts of horror. It was as if a spell had been cast. All was silent. In the center of the crowd a boy lay in a pool of blood. It was the dead man?s sixteen-year-old son, who with his brothers and half-brothers had been dancing the traditional farewell to their father.

The topic of reducing cycle time

Chapter IILiterature ReviewThis chapter reviews old research and theories that cite the subject of cut downing rhythm clip, which is relevant to tilt constructs and simulation. The subject of this chapter are below.Product rhythm clip bettermentPrinciples of thinSimulation ModelingReview literatureResearch Frame workIn the past, most research focused on the development of dispatching and releasing regulations to better rhythm clip. With less limitation on the equipment, batch size decrease would be another alternate to shorten rhythm clip which considered apparatus clip and capacity restraints to work out the batch size job. Some constructs use thin fabrication to extinguish waste and non-value-added clip. Some bookmans used simulation methods to make the rhythm clip analysis by uniting simulation and computing machine algorithms to seek for the batch size for each single merchandise in a multi-product environment. Most of the past surveies sing batch size concentrated on traditional fabrication environments, with fixed demands and production rates. The primary end of this model was to minimise the entire production rhythm clip.2.1 Product rhythm clip bettermentCycle clip decrease involves placing and implementing more efficient ways to make things. Reducing rhythm clip requires extinguishing or cut downing non-value-added activities, which is defined as any activities that do non add value to the merchandise. Examples of non-value-added activities in which rhythm clip can be reduced or eliminated include fix due to defects, machine set-up, review and agenda holds. Explained by Kivenko ( 1994 )1.2.1 The component of fabricating lead clip can be farther divided into:Queue clip before processing.Put up clip.Run ( treating ) clip.Waiting clip after processing.Move clip.There is an of import follow-on consequence to cut downing the frequence of set-ups. Just as presenting computing machine integrated fabricating removes operator engagement and operator accomplishments wasting ( Coble and Bohn, 1997 ) , diminishing set-up frequence drives set-up proficiency down. The danger is an of all time downward spiral of cut downing set-up frequence and increasing batch size. Even when the operator component is reduced or replaced in â€Å" flexible † fabricating systems, the public presentation is in some instances worse than the manual system. Rather than bring forthing more assortment of lower v olume, these systems frequently produce less assortment of higher volume ( Meyer, 1993 ) . That is to state, set-up clip is reduced and batch size increased. ( Youngman, 2003 )2.1.2 BottleneckA constriction is the resource that constrains or limits the end product of the overall operating unit. In a line flow procedure design, the constriction is the procedure phase with the highest rhythm clip. In a occupation store or batch procedure design, the constriction can be more hard to place. Certain pieces of equipment and/or specific people may be used at multiple procedure phases. ( Prasad, 1995 )2.1.3 BATCH SIZEPage ( 2003 ) explained â€Å" batch † is the term usually used for the measure of a peculiar merchandise to be made all in one spell. An full batch of work might take several yearss to finish. Traditionally, this would affect the batch traveling through one operation at a clip, and it would n't be allowed to travel to the following operation until the full batch measure had gone through the current phase of processing. The batch is kept together like this to let the inspector a opportunity to compare the constituents from the beginning, center and terminal of the batch to specification all at the same clip. It is easy to maintain WIP on procedure. Schragenhein and Dettmer ( 2000 ) said that increasing batch size affects work-in-process stock list degrees, fabricating lead clip, local and planetary safety clip issues, and finished goods stock degrees by increasing them. Increased batch size affects quality and throughput by diminishing them. However, good thought-out alterations to critical batch sizes can enormously alter these parametric quantities within a procedure. It does so non by rushing up machine or procedure clip, but by cut downing idle clip when work sits on the workshop floor ( or office desk, or computing machine difficult disc ) between procedure points after cut down batch size found that smaller batches can travel much faster. Batch size issues at a formal degree have tended to be treated as a trade-off analysis or optimisation between set-up or ordination costs, storage and retention costs, and stock out costs ( Jaber and Bonner, 1996 ) . The attendant optimum batch size is known as the Economic Order Quantity or EOQ. ( Trigeiro, Thomas and Jo, 1989 ) . However, while most everyone knows about Economic Order Quantity, really few people of all time bother to cipher it. There is a far more cardinal driver to batch size. The cardinal driver is cut downing â€Å" non-productive † set-up clip, and maximising â€Å" productive † processing or machine clip. There are normally really strong measuring inducements – timesheets – which cause workshop floor forces to minimise set-up clip and maximise procedure clip. The easiest manner to make this is to diminish the frequence of set-ups by increasing the batch size. There is, nevertheless, another more elusive and less frequently expressed driver at work every bit good. ( Spearman, 1996 ) Some considerations when taking the figure for batch size: Koskela ( 1992 )If the figure is excessively big, the sum of queue infinite taken up on both terminals of the nexus becomes inordinate. Messages take up queue infinite when they are non committed, and can non be removed from waiting lines until they are committed.If there is likely to be a steady flow of messages, you can better the public presentation of a channel by increasing the batch size. However, this has the negative consequence of increasing restart times, and really big batches may besides impact public presentation.If message flow features indicate that messages arrive intermittently, a batch size of 1 with a comparatively big disconnect clip interval may supply better public presentation.Even though liable messages on a fast channel do non wait for a sync point, they do lend to the batch-size count.Thin rules can be used to better productiveness driven by workers, based on their cognition of the work and equipment , with the end of increasing value added work ( Holly and Gaskins, 2004 )2.1.4 Cycle clip is linked to other facets of ThinContinuous betterment leads to step betterments in rhythm clip one time takt times come down for all stairss.Standardized work is a cardinal to doing rhythm clip work on the floor.2.2 Principles of LeanLean was started at Toyota because they wanted a clear definition of client value. It acknowledges that all value is created by some procedure. Therefore, Lean can develop procedures that are waste or â€Å" muda † is defined by Shoichio Toyoda, laminitis of Toyota, as â€Å" anything other than the minimal sum of equipment, stuffs, parts, infinite and worker ‘s clip which are perfectly indispensable to add value to the merchandise. † Lean is a methodological analysis that is used to increase velocity and cut down the cost of any procedure by extinguishing waste. A Thin enterprise is to give a simple manner of understanding the impact of attemp ts through be aftering betterment activities, look intoing the consequences and doing appropriate accommodations. In add-on, Lean tools aid to find the fiscal impact of betterments such as increasing stock list bends, cut downing work-in-process and cut downing changeover clip. ( Ohno, 1990 ) The Toyota Production System ( TPS ) identifies seven signifiers of waste in fabrication, which Ohno calls â€Å" The Seven Deadly Wastes. † The wastes can be classified as follows:Overproduction: doing more than neededInventory: material puting around ( frequently a symptom of another waste )Defects: Time spent repairing defects, including defect that get thrown off and the clip make the merchandise rightWaiting: Waiting clip for making something..Over processing: devising to a higher quality criterion than expected by the client.Transportation system: extra moving of stuff.Gesture: inefficient people motion.Thin Manufacturing is an operational scheme oriented toward accomplishing the shortest possible rhythm clip by extinguishing waste. It is derived from the Toyota Production System and its cardinal push is to increase the value-added work by extinguishing waste and cut downing incidental work. The technique frequently decreases the clip between a client order and cargo, an d it is designed to radically better profitableness, client satisfaction, throughput clip, and employee morale. ( Michael and Kentaro, 1998 )2.2.1 Features of a Leans procedureThe features of Lean procedure aid to flux of procedure run every bit continuously as possible with a rapid rhythm clip. The precise description of each work station activity stipulating rhythm clip, take-time, the work sequence of specific undertakings, and the minimal stock list of parts on manus needed to carry on the activity ( Stenzel, 2007 ) . The features of thin procedures are:Make to orderSingle-piece productionJust-In-Time materials/pull programmingShort rhythm timesQuick conversionContinuous flow work cellsCompressed infiniteMulti-skilled employeesHigh first-pass outputs with major decreases in defects2.2.2 Thin toolsThin fabrication tools can decide many jobs in production lines. In This chapter we will concentrate on thin tools that concern this survey by utilizing standard work and rapid conversion.2.2.2.1 Standard Work: DefinitionThe definition of standard work was explained by Jeff Hajek ( 2009 ) a common term given to any aggregation of clip value. The format of the information is as tabular arraies or worksheets. The informations can be utilized in concurrence with deliberate rhythm clip but can non make up one's mind the operating parametric quantities for a works supplying a thin fabrication environment. Standard Work has three chief constituents:It is balanced to the takt clip.It specifies standard work-in-p rocess ( WIP ) .It defines the sequence of operations for a individual operator.The precise description of each work activity stipulating rhythm clip, undertaking clip, the work sequence of specific undertakings, and the minimal stock list of parts on manus needed to carry on the activity. Henry Ford said that â€Å" If you think of standardisation as the best that you know today, but which is to be improved tomorrow – you get someplace. But if you think of criterions as confining, so advancement Michigans. † Somnath Kundu ( 2008 ) studied the application of design mechanization to cut down rhythm clip of hydro turbine design. Because of the rapid growing in the demand for electricity and increased recognition hazards in the fiscal markets, there is a strong concern deriver? To cut down the design to committee rhythm clip of procedure. The first measure that is of import is standardisation. The key to success for any design mechanization undertaking is standardisation: The standardisation of the merchandise construction and design pattern and automatizing the same has given the user an border over its rivals. Front Line Professionals ( 2001 ) : said that Standardized work is one of the most powerful thin tools. Professionals that do the work on the floor can frequently outdo papers the current best patterns. Establishing standardised work relies on Roll uping and entering informations as it really happens. Such standardised patterns serve as the baseline for kaizen or uninterrupted betterment. As the criterion is improved, the new criterion becomes the baseline for farther betterments, and so on. Standardizing the work adds subject to the civilization, an component that is often neglected but indispensable for thin transmutation. Standardized work besides supports audits, promotes job resolution, and involves squad members in developing safety guards ( poka-yokes ) . All of the standardisation attempts need to be surrounded and embedded in the civilization of the thin organisation.2.2.2.2 Takt clip: DefinitionTakt Time comes from a German word ‘takt ‘ significance beat. The definition of Take clip was explained by Jon Miller ( 2003 ) is a 1 of the cardinal rules in a Thin Enterprise. Takt Time sets the ‘beat ‘ of the organisation in synch with client demand. Takt Time balances the work load of assorted r esources and identifies constrictions. Takt Time is a simple construct, yet counter-intuitive, and frequently baffled with rhythm clip or machine velocity. In order for fabricating cells and assembly lines to be designed and built Lean, a thorough apprehension of Takt Time is required. Takt Time is used to fit the gait of work to the mean gait of client demand. Takt is non a figure that can be measured and is non to be mistaken with rhythm clip, which is the clip it takes to finish one undertaking. Cycle clip may be less than, more than, or equal to Takt Time. The expression for Takt clip is: Takt clip = Net Available Time per Day Customer Demand per Day2.2.2.3 Rapid alteration overtimeSMED ( individual minute exchange of dice ) is a theory and tools set of techniques that make it possible to put up or alteration overtime equipment. Change overtime is the clip from when the last goods item/piece comes off a machine or out of a measure until the first good item/piece of the following service/product is made. Changeover clip includes set up, warm up, test tally, accommodation, first-piece review, etc. Changeover Time is the sum of clip it takes to alter over equipment/programs/ files/documents from the terminal of the old measure to the beginning of the current measure. Changeover is the sum of Set-up clip and Run-up clip. Changeover can be the clip and do the difference between a good merchandise and a good merchandise at the right velocity. If can cut down alteration overtime, can cut down rhythm clip of procedure as good. Jaikumar ( 1986 ) while Dave ( 1996 ) need to cut down machinery alteration overtime because have two biggest wastes are overrun and WIP waiting lines. There is one â€Å" existent † issue that must be overcome in order to greatly cut down batch size without increasing cost. The constituent of alteration overtime following list:Internal apparatus takt that can be performed merely while the machine is shut down.External set up takt that can be performed while the machine is running2.2.2.4 Effectss of alteration overtime DecreaseBatch size can be reduced.Aid to cut down stock list.Increase the capacity on constriction equipment.Aid to extinguish the apparatus bit2.2.3 Traditional V. Thin FabricationA cardinal difference in Thin Manufacturing is that it is based on the construct that can be driven by existent client demand. Alternatively of bring forthing what you hope to sell ; Lean Manufacturing can bring forth what your client wants with shorter lead times. Alternatively of forcing merchandise to market, it ‘s pulled at that place through a system that ‘s set up to rapidly react to client demand.2.2.3 Traditional V. Thin FabricationA cardinal difference in Thin Manufacturing is that it is based on the construct that production can and should be driven by existent client demand. Alternatively of bring forthing what you hope to sell ; Lean Manufacturing can bring forth what your client wants with shorter lead times. Alternatively of forcing merchandise to market, it ‘s pulled at that place through a system that ‘s set up to rapidly react to client demand.2.3 Simulation ModelingSimulation is the dynamic representation of a existent system by a computing machine theoretical account which behaves in the same mode as the system itself. In the fabrication industry, simulation represents the dynamic fabrication procedure in the computing machine theoretical account, and shows diagrammatically and over fake clip the effects of a possible scenario to back up the decision-making procedure . Bielunska and Gun ( 2002 ) .A conventional information flow of fabricating simulation is shown in Figure 2-4. Manufacturing simulation converts the elaborate operational informations into the direction information. It enables assorted scenarios to be tested without big investing on puting up a pilot line or interrupting the production. It eliminates the common job in fabricating industry: constrictions2.3.1 Application Areas of Manufacturing Simulation.In the fabrication companies, directors and applied scientists are able to measure the public presentation of fabricating procedure under several different sets of status to place the proper layout and operational policy. That can lend to accomplish better production public presentation such as high throughput, short lead clip, low work-in-process ( WIP ) , and high resource use. Case of the application of fabricating simulation by the current users are:Implementing new fabrication constructImperfect design from the debut of this construct can do the production end product decrease ; nevertheless, the possible jobs can be identified by simulat ion. The re-layout undertaking of National Semiconductor Malaysia studied in one procedure Tung, Wang and Sun ( 1995 ) by utilizing simulation is the good case. Before application of new layout, the kineticss of simulation benefit indentified the possible jobs, helped the affecting section to understand the procedure of new layout, and saved 5 % on the capital investing. Bettering bing procedure; the bing procedure demand to be adapted to manage the new demand when new merchandises are launched or demand pattern becomes different from the yesteryear. Simulation is really effectual to analyze the impact of alteration to smooth the alteration. Motorola Malaysia was reported the economy to be US $ 250,000 equivalent of capacity addition within one twelvemonth after the company usage simulation to analyze the merchandise mix and batch size to better the apparatus clip and machine aid clip Yong ( 1994 ) . Reducing Work-In-Process ( WIP ); a high WIP is frequently built because of unexpected dislocations, taking to a high stock list cost, slow stuff flow, and inflexible merchandise mix. Simulation is used to analyse the sensitiveness of WIP degrees. Flextronics Singapore used simulation to analyze the most economical manner to cut down WIP and the consequence reported at more than 50 % decrease, significantly improved others company public presentation such as stock list, bringing public presentation Chang and Kum ( 1994 ) . Merchandise timing: Simulation is superb for make up one's minding the order lading sequence and operation timing. It was arranged a systematic direction to the merchandise store degree. It is easy to happen this simulation on a day-to-day footing to bring forth timing instructions to the operations of PCB Manufacturing CIMTEX ( 1994 ) at Digital Singapore. These besides greatly reduced WIP and stabilized operations.2.3.2 Core propensity construct and SimulationTo set up the direction acquisition by following a description of how simulation is being usage since it increasing larning perceptual experience. Along prognostic simulation tilting theoretical account. Learning period is greatly reduced and eliminates waste. Majority companies have been utilizing simulation to happen solution to making value or merchandise betterment procedure. Simulator procedure created an thought tool for developing alternate procedure scenarios to help the public presentation of current operation ineffic iencies. Furthermore, the function theoretical account to extinguish through the atilt execution.2.4 Review of related surveies.2.5 Researching Model Work:The nucleus constructs of the theoretical account are a type of intermediate theory that attempt to link to all facet of enquiry ( e.g. , job probe, intent, literature reappraisal, methodological analysis informations aggregation and analysis ) . This theoretical account is able to make the maps that give coherency to empirical enquiry. Due to the theoretical accounts are possible similarity to empirical enquiry, they take different signifiers depending upon the research inquiry or job in figure 2-5.2.5.1 The constituent of the rhythm clip determination elements:Processing clip: timing that the thing is being worked on by an operation. To analyzing this affair earnestly by utilizing tool ; a stop watch from camera – following unit being processed by one operator – all the manner through the procedure ( or sub-process ) .Waiting clip: timing between sub-process that the thing gets shuffled around or sits around waiting for person to work on it. Equally good as cognizing â€Å" Waiting & A ; Transportation Time † or â€Å" Inventory/Transpiration Time. In this instance have consequence from waiting clip in each work station and wait clip of portion of auto theoretical account.Change overtime ; the sum of clip takes to alter over the devising or plan from the terminal to old measure to the current measure. If you have to takes ever will consequence with entire rhythm clip.Since a batch size of one has been unpracticed the end is in improve productiveness sporadically. The finally reduces stock list carry costs, work in advancement, and rhythm clip. Besides this enabling the company operates productively at lower borders.2.5.2 The significance of component of the finding in rhythm clip decrease.Productiveness: From analyzing shown manner to better productiveness by cut down rhythm clip in o rder to protect loss sale, cut down cost in fabrication and increase client satisfaction.A cost incurred by a concern when it is unable to make full an order and must finish it subsequently. A back order cost can be distinct, as in the cost to replace a specific piece of stock list, or intangible, such as the effects of hapless client service.On clip deliver: one of the ground why is company demand to cut down rhythm clip. The existent measuring will be the per centum of units you produce that run into your client ‘s deadline. Is n't it interesting that it has to make with the client ‘s deadline.In this chapter, the research worker has discussed relevant constructs in rhythm clip decrease by usage simulation to optimal batch size every bit good as suggesting the construct model for this research undertaking. In the following chapter, the research worker will explicate the methodological attack this undertaking.

How the U.S. Is Countering Terrorism

How the U.S. Is Countering Terrorism Terrorism is not new, nor is the practice of trying to prevent it through  counterterrorism  measures. But as the number of terrorist attacks has skyrocketed in the 21st century, the United States and other nations have had to become much more proactive in defending their citizens from such violence.   Counterterrorism in the U.S. The U.S. government has made fighting terrorism a priority since the early 1970s, following the terrorist attacks on the 1972 Summer Olympics in Munich, Germany, and several airline hijackings. But it was the Sept. 11, 2001, terrorist attacks that made counterterrorism a pillar of domestic and foreign policy in the U.S. and beyond. The RAND Corporation, a defense policy think tank, defines the ongoing war on terror this way: Counterterrorism, since 2001, threatens terrorist safe havens, infiltrates terrorists financial and communications networks, hardens critical infrastructure, and connects the dots among the intelligence and law enforcement communities... Several federal agencies play critical roles in contemporary counterterrorism, both domestically and internationally, and often their efforts overlap. Among the most important are: Department of Homeland Security: The lead agency in charge of all domestic anti-terrorism and security activities.Department of State: Manages  the development and implementation of all U.S. government policies and programs aimed at countering terrorism overseasOffice of the Director of National Intelligence: Coordinates the gathering, analysis, and sharing of data among federal intelligence agencies such as the FBI and CIA.Federal Bureau of Investigation: Executes counterterrorism actions such as surveillance and investigation in conjunction with other law-enforcement agents at the local, state, and federal level.Central Intelligence Agency: Collects, analyzes, and shares international intelligence and data to inform and carry out U.S. foreign policy.National Counterterrorism Center: Plans  and coordinates counterterrorism policies and programs among federal agencies Fighting terrorism isnt limited to these agencies. The Department of Justice, for example, is responsible for prosecuting terror-related criminal cases, while the Department of Transportation frequently works on security issues with Homeland Security. State and local law enforcement agencies are often involved in some capacity as well.   On an international level, the U.S. government frequently cooperates with other countries on matters of security. The United Nations, NATO, and other nongovernmental organizations also have established counterterrorism policies of their own. Types of Counterterrorism Generally speaking, counterterrorism efforts have two goals: to protect the nation and its citizens from attack and to neutralize threats and actors who would attack the U.S. Defensive measures can be simple, like placing concrete bollards in front of buildings to stop an explosive-laden vehicle from getting too close. Video surveillance of public areas coupled with facial-recognition technology is another, considerably more advanced defensive counterterrorism measure. The security lines at U.S. airports, operated by the Transportation Security Agency, are yet another example. Offensive counterterrorism measures can range from surveillance and sting operations to arrests and criminal prosecutions to seizing financial assets and military action. In February 2018, for example, the Treasury Department froze the assets of six people known to conduct business with Hezbollah, an Islamic organization the U.S. has labeled a terrorist organization. The 2011 raid by Navy Special Forces on Osama bin Ladens Pakistan compound, which resulted in the death of the Al Qaeda leader, is one of the best-known examples of successful military counterterrorism activity. Sources Jenkins, Brian. Bush, Obama, And Trump: The Evolution Of U.S. Counterterrorist Policy Since 9/11. ICT.org.il. 24 September 2017.Lederman, Joshua. Taking Aim at Iran, US Hits Hezbollah With New Sanctions. StarTribune.com.  2 February 2018.Roser, Max; Nagdy, Moses; and Ritchie, Hannah. Terrorism. OurWorldInData.org. January 2018.United Nations staff. UN Global Counter-Terrorism Strategy. UN.org.  United States Department of State. Country Reports on Terrorism 2016. State.gov. July 2017.

POW essays

POW essays In a striking study of life at Union POW camps during the Civil War, Philip Burnham creates little doubt that the Union was as brutal as the Confederacy. Burnham uses the collection of memoirs made by two separate Confederate prisoners held captive in northern camps to illustrate the harsh conditions that existed during the span of the war. Anthony M. Keiley provides a bulk of the inside information used by Philip Burnham. Keiley, a lawyer and newspaper editor prior to the war provides well written analyses of the camps in the northern states. Keiley creates a few relationships with the higher-ups at his internment camp, which ensured that his treatment was a little nicer than some of the others in at Elmira prison. With a slightly contrasting view, another prisoners outlook on the camps comes from one who did not in anyway attempt to get on the good side of his captors. The man that provided this view was John King of the 25th Virginia Infantry. Both Keiley and King provide the details of lifestyles in the camps. With information given from people that were receiving first-hand experience, the sources are very reliable. Burnham relays the descriptions of how the men were tortured, what the rations were like, and how the prisoners passed the time. They stood motionless and gazed into one anothers haggard faces with despairing eyes. There was no need to talk, as all topics of conversation had long since been exhausted. (52) With so much time and so little to do, the men resorted to nothing. A sad truth that compels the reader to understand the torturous affect this environment had on its inhabitants. Perhaps one the most recognized camps during the Civil War is the camp in Andersonville, Georgia. The accounts of prisoners held at Andersonville make one of the strongest implications that this was a war that was not so civil. The history of the prisoners at Andersonville is so bleak that the...

Web portal. Solving environmental issues in the society Essay

Web portal. Solving environmental issues in the society - Essay Example This research proposal is about the web portal. A web portal is a very effective tool to inculcate knowledge about the environmental science. People connect with one another to form a learning community using web portals. The portal serves as platforms where all the information, resources, and expert in the field of environmental science can be accessed. The portal is a full time available source of information that helps in the growth of the learning community as they engage in discussions, exchange views, and conduct activities that promote environmental learning. Online document libraries available in the portal are constantly updated with latest research findings. Simulation of real life environment is also made available through the web portal. Introduction The research proposal is aiming at establishing a web portal that will be accessible to the students and the community. The portal is aimed at solving basic environmental issues that affects the society. The portal will conta in social services for people to interact and provide their views concerning environmental degradation and means of improvement. The portal will also contains graphs, maps, and pictures of the surrounding community to help understand environmental challenges affecting the society. There will be need to locate areas of collecting relevant data and information for the portal. Institute for Sustainable Resources (ISR) has previously engaged in managing a Nitrous Oxide research database that was made available to the community for research purpose on its effects on grains. The project was delivered by use of open source research data and management system that allowed people to post tier comments concerning Nitrous Oxide. To date ISR has managed to deliver comprehensive data management systems to the public that helps in dealing with environmental issues in Australia. Statement of the Problem There have been increased environmental concerns about the sharp decline in environmental care and preservation. People are cutting down trees hence destroying water catchment areas. Human are also responsible for draining toxic substances and chemicals in rivers, lakes, and other lager water bodies hence leading to destruction of aquatic life. There is also the habit of human encroachment on gazetted forests due to increasing human population. There has also been evidence of global warming that have changed weather patterns in the world due to heavy production of greenhouse gases to the atmosphere. These are just but few problems that affect the environment. For this purpose, this research proposal aims at solving the following researchable questions. How to design a web portal that will highlight all the environmental problems and provide solutions Where to collect and receive relevant data and information on environment for the web portal How the portal management will be able to deal with diverse large and high speed data How the site will be able to conduct large researc h from diverse and multiple origins and on how much larger spatial and temporal scales Purpose of the study The research is about designing an educational web portal that will give interactive insights on how to tackle environmental issues in the community and the world at large. The web portal will be designed with the help of ISR who have experience in managing data bases for environmental issues. Their design will incorporate ability to provide relevant updates and methods of collecting and conducting research on multiple and larger temporal scale. Objectives The following are the objectives for the research proposal Provide the fastest means of communication to students and the society concerning environmental science Provide history and background on environmental science especially on land degradation Provide accessible data bases with a lot of data that is raw and collected on up to date basis Provide simulations to enable the students to make their own comparisons and come u p with their own conclusions Hypothesis The

Self-Learning and Development Essay Example | Topics and Well Written Essays - 1250 words

Self-Learning and Development - Essay Example To acquire these skills and abilities and succeed in the 21st century the youth should dedicated to learn new skills and improve their efficiency and performance. These skills and abilities cannot be learned form the classroom studies, they need to learn from the environment and circumstance where they live or work. There are wide range of answers to the question of what are the skills and abilities required for the students to succeed in the future. This mainly depend on the characteristics of the individual and the education what they are acquiring from the studies. The four major categories where the students should improve are the communication skills, abilities to apply new technologies, critical thinking and multicultural awareness. The students learn the formal education from the classroom and informal learning from the world where thy live and work. (Walsh & Paul, 1986) The current scenario in the professional world is more competitive. Those who have the skills and ability will be move ahead and survive in the industry. The people need to learn themselves from the work environment and improve their skills and ability. The people should take responsibility to learn and develop themselves. The self-learning and development will enhance the individual performance as well as the organization performance. The Human resource department in the organization make arrangement for the self learning infrastructure to the employees, so that they can improve them selves and indirectly it will help to improve the performance of the organization. The people are learning one or another in their entire life in every situation or circumstance, which they faced in the everyday life. The continuous learners are always founds and successful persons. The continuous learners are considered more responsible and they can remain employable and marketable by themselves. The 21st century is the period of more challenges, global competition and advanced technology. So those who have resource of skills and ability will move ahead. More than educational qualification the employer will look into the skills and qualities of a person before taking him for the employment. The organization will look into the cost efficiency and effectiveness. (Arnold, 1997) The students need to develop the communication skills through which they can exchange the thoughts and ideas by speech or writing. Multicultural awareness will help them to understand and work with diversity. They should have the management skill to guide or organize the people and implement the ideas and policies. The ability to work in-group and adapt to the situation are the major qualities, which a students should develop in his college days. The work ethics, self-discipline and responsibility are the major factor through which a person will be judged and appraised in the organization. The discriminative thinking and analytical reasoning will enchance the performance of the person. (Hoare, 2006) These skills and abilities you cannot find the curriculum, but to be successful in the future the students should develop themselves by self-learning. Those who self-learners and improve their efficiency will move ahead in not only in his professional career but also in his life. So the self-learning is an art, every body should develop this by their own to succeed in life. In this century, the competition are higher in every

Effects of Hurricane Katrina on the gulf coast Essay

Effects of Hurricane Katrina on the gulf coast - Essay Example Effects of Hurricane Katrina on the gulf coast To understand what happened to New Orleans and the Gulf Coast during Katrina, however, one must first understand a bit about hurricanes, tropical storms, and their classifications. Storm occur when there are four specific weather conditions present – low air pressure, warm temperatures, moist ocean air and tropical winds blowing near the equator. Hurricanes begin as a tropical depression, with wind speeds of 23-39 mph, and falling air pressure. Once the wind reaches speeds of 39-73 mph, it upgrades to a hurricane. Category 1 hurricanes have winds from 75-94 mph, which does not cause real damage to structures, only to mobile homes, trees and shrubs, and flooding is kept to a minimum (Brinkley , 2006, p. 17). Category 2 hurricanes have winds from 96-100 mph (Fradin & Fradin, 2010, p. 14). Category 3 is much stronger, with winds from 111-130 mph, which causes some structural damage to small residence, destroys mobile homes, and more flooding (Brinkley, 2006, p. 15). Category 4 hurricanes have winds from 131-155 mph (Fradin & Fradin, 2010, p. 14). Category 5 has winds in excess of 155 mph, which causes â€Å"complete roof failure on many residences and industrial buildings. Some complete building failures with small utility buildings blown over or away. Major damage to lower floors of all structures located less than 15 feet above sea level and within 500 yards of the shoreline. Massive evacuation of residential areas on low ground within five to ten miles of the shoreline may be required†.... Some complete building failures with small utility buildings blown over or away. Major damage to lower floors of all structures located less than 15 feet above sea level and within 500 yards of the shoreline. Massive evacuation of residential areas on low ground within five to ten miles of the shoreline may be required† (Brinkley, 2006, p. 17). Beginning as a tropical depression over the Bahamas on August 23, 2005, then gaining strength while hitting landfall in Florida (Hoffman, 2005, p. 4), Hurricane Katrina began hitting the Gulf Coast as a Category 3 Hurricane, with winds up to 141 mph (DesRoaches, 2006, p. 1). The original reports were that Katrina might only hit the Gulf Coast as a Category 1, which is the lowest grade of Hurricane, but, even while reports were that she was a Category 1, there was apprehensiveness that she would pick up fury and steam before hitting the Gulf region (Reid & Theiss, 2005, p. 4). As Hurricane Katrina hit the mainland of America, in Florida, she was only a Category 1, with wind gusts of 80 MPH, but picked up strength as she passed the warm waters of the Gulf of Mexico, which put the Gulf states of Mississippi and Louisiana into a state of emergency (Rodger, 2006, p. 11). While the devastation in New Orleans is what attracted the most attention, and is what will give Hurricane Katrina its most notoriety, Hurricane Katrina was a devastating storm all around, as it damaged 45 bridges, destroyed railroad tracks and caused debris to fall into the road which cost $200 million in cleanup costs (Rodger, 2006, p. 1). Of course, Katrina was not the only hurricane during the 2005 hurricane season, although she was easily the most famous of that bunch. 15 hurricanes

Active Voluntary and Nonvoluntary Euthanasia Essay Example for Free

Active Voluntary and Nonvoluntary Euthanasia Essay The term euthanasia originated from the Greek word for good death. It is the act or practice of ending the life of a person either by lethal injection or the deferment of medical treatment (Munson, 2012, p. 578). Many view euthanasia as simply bringing relief by alleviating pain and suffering. Euthanasia has been a long-standing ethical debate for decades in the United States. Active euthanasia is only legal in the Netherlands, Belgium and Luxembourg. Assisted suicide is legal in Switzerland and in the United States in the states of Washington, Oregon and Montana (Angell). Several surveys indicate that roughly two thirds of the American public now support physician-assisted suicide, and more than half the doctors in the United States do too (Angell). Active voluntary and nonvoluntary euthanasia matter because they allow the patient or family to relieve them of pain and suffering, and to die with dignity and respect. In this paper I will argue that it is immoral and unethical to deny a patient the right to die and that active voluntary and nonvoluntary euthanasia should be a legal practice in the United States. When denied the right to die one can endure a tremendous amount of physiological and emotional pain. The 1973 case of Dax Cowart is a great example of this. Dax went through fourteen months of grueling, barbaric treatments of skin debriding, tank soakings, and dressing changes. He compared the debridements to being skinned alive and the solutions poured over his skin were like having alcohol poured over raw flesh except it burns more and longer (Asher). Dax requested on several different occasions to just leave him alone and let him die but all of his physicians’ refused his requests and kept going with their treatment plan. The physicians were going against the principle of non-maleficence, which states, â€Å" Physicians have an obligation to do no harm to the patient† (Munson, 2012, p. 892). Dax suffered through painful debridements for months without proper pain control because his physicians were too worried about him becoming addicted to the pain medications. They knew how painful these debridements were for their patient and they continued to maintain the same treatment plan with no modifications. They deliberately violated the principle of non-maleficence. If active voluntary euthanasia were an acceptable practice in society, Dax ould have been able to refuse the treatments and die by way of infection, or a physician could have given him a lethal injection. Either of these options would have helped Dax to die keeping his wishes of dignity and respect intact. In this case, death is less harmful than the barbaric treatments that Dax had to endure for countless months. Today, many Americans are so concerned about the possibility of a lingering, high technology death that they are responsive to the idea of doctors being allowed to help them die (Angell). This is why we need to legalize active voluntary and nonvoluntary euthanasia in the United States. In an article from The New England Journal of Medicine, Marcia Angell states, â€Å"The most important ethical principle in medicine is respect for each patients autonomy, and that when this principle conflicts with others, it should almost always take precedence† (Angell). To deny someone his or her autonomy is to treat that individual as something less than a person (Munson, 2012, p. 900). It is wrong to take control of someone else’s life and to dictate their actions. Each person has a right to act autonomously; in doing this they must have the ability to choose among different options. A forced option is no option at all (Munson, 2012, p. 901). Dax Cowart was denied his autonomy when the doctors would not listen to his wishes of wanting to die; instead they did what they wanted. Munson states that, â€Å"Making decisions for the good of others, without consulting their wishes, deprives them of their status as autonomous agents† (Munson, 2012, p. 902). Dax was not given options to choose from, nor was his voice heard at all in the process, which violated the entire principle of autonomy. It should have been his choice because it was his life. In a completely different case, Terri Schiavo was denied her autonomy when she was kept alive on a feeding tube, when she had previously stated this was not what she wanted if it ever came down to it. With our autonomy, we should have the right to say how and when we die. It should not be based solely on societies morals, values, and beliefs. No one else should have the right to decide how one ends their life, except for that person. We value our autonomy because we are more willing to live with our own choices then to have somebody else decide for us. Active voluntary and nonvoluntary euthanasia give patients their autonomy and right to die with dignity. Active voluntary and non-voluntary euthanasia should be an approved practice because it allows patients who are in a persistent vegetative state the chance to die with dignity, while allowing their loved ones to keep their morals and values in place. Patients that end up in such unfortunate circumstances are unable to use their autonomy and make decisions regarding their treatment and potential end of life care. Maintaining one’s autonomy is part of a dignified death. If these were approved practices, it would allow family members the chance to put an end to their loved one’s suffering the way they would have wanted. It is unethical to force someone to do something against their will, as it is also immoral to make someone live if it’s against their wants or beliefs. On February 26, 1990, Terri Schiavo collapsed and unexpectedly went into a persistent vegetative state, where she remained for fifteen years by sustaining artificial hydration and nutrition through a feeding tube. Terri lost all dignity and autonomy when her terminal illness came, requiring care around the clock. Michael Schiavo believed that his wife would not want to be kept alive in her condition, which ultimately lead to his decision of discontinuing her feeding tube. After a long, tortuous thirteen days, Terri starved to death. The way Terri died was very inhumane and unethical; however it is an approved practice in the United States that continues to be used even today. If active voluntary and non-voluntary euthanasia were an acceptable practice in the United States, patients like Terri would not have to die in such a barbaric way. It is unethical to allow a patient to starve to death, as it is also unethical to deny a patient the right to die (Munson, 2012). Non-voluntary euthanasia would have allowed Terri to die pain free with her dignity and wishes in place. In Timothy Quill’s article, Death and Dignity, A Case of Individualized Decision Making, he talks about his patient Diane, who was diagnosed with leukemia. Diane denied all treatments and eventually agreed upon home hospice care. It was extremely important to Diane to maintain control of herself and her dignity during the time remaining to her. She wanted to remain an autonomous person, and when this was no longer possible, she clearly wanted to die. She asked Dr. Quill for sleeping pills, which he wrote a prescription for knowing she had trouble sleeping, but also knowing it could be a means to an end when the time came for Diane. Diane was able to make an informed decision to take her own life and to die with dignity and her wishes respected in the end. Dr. Quill states, â€Å"I know we have measures to help control pain and lessen suffering, to think that people do not suffer in the process of dying is an illusion† (Quill 2). This is why people in our society should be more open-minded to active voluntary and non-voluntary euthanasia. These two concepts can allow our terminally ill, suffering, loved ones to die with the dignity and respect they deserve, like Diane was able to do. Patients who are diagnosed with a terminal illness such as cancer or progressive neurological disorders eventually become weak and debilitated. These patients end up relying on family, friends, and healthcare workers to help them do their activities of daily living such as batheing and eating. Many of these terminally ill patients lay in bed suffering, with zero quality of life, just waiting to die. These patients have lost their will to live and find no joy or simple pleasures left in life because their pain has become too unbearable. These patients suffer on a daily basis, while family and friends watch, helplessly; as their loved ones decline day by day. It is unethical for society to expect these patients to go on with the quality of life they are maintaining. Terminally ill patients should be allowed to control their demise and end their suffering at their own disposal. Therefore, active voluntary and non-voluntary euthanasia should be a socially acceptable and approved legal practice in the United States. One could oppose the original argument saying that active voluntary and nonvoluntary euthanasia should remain illegal in the United States because it is inhumane and barbaric. Patients do have other options such as hospice programs and pain control. These provide alternative options that can be ethically and morally acceptable in our society. There are a number of options to treat chronic pain such as narcotics. There are an enormous variety of narcotics on the market, all of which can be tried until a specific one is found to be to right for that patient. Palliative care and hospice programs are gaining more attention for the end of life care they provide for terminally ill patients. The goals of these programs are based on comfort care, dignity and respect to the terminally ill patient. These programs allow patients to die with their dignity, respect, morals, and values all in place. Due to the fact that there are other options available for terminally ill patients, other than death, active voluntary and non-voluntary euthanasia should remain an illegal practice in the United States. Another powerful argument made by Marcia Angell is that â€Å"people do not need assistance to commit suicide, with enough determination they can do it themselves† (Angell). People who are too debilitated for physical means can simply just stop eating and drinking and ultimately starve to death, while others given a terminal diagnosis, that have physical means, can end their lives by pills or a gun. This is another reason why active voluntary and non-voluntary euthanasia should remain an illegal practice in the United States. In response to this objection, a rule utilitarian could argue that, the taking of a human life is permissible when suffering is intense and the condition of the person permits no legitimate hope (Munson, 2012, p. 84). Pain cannot always be controlled by narcotics and pain-alleviating techniques, there will always be a small percentage of patients whose suffering simply cannot be adequately controlled. Palliative care and hospice programs are a great idea but are not available to everyone because not everyone has insurance and the means to afford them. They can be very pricy and space is very limited, even with insurance and affordab ility in place. Allowing active voluntary and nonvoluntary euthanasia would give patients more ethical options for death, rather then having to commit the ultimate sin of suicide by starvation or the use of a gun. It is unethical to make a person feel that starvation or the use a gun are their only options. Having the options that active voluntary and nonvoluntary euthanasia can give, would enable a patient to many more ethical options for death, which would ultimately, relieve family members from having to deal with the emotional pain and suffering of finding their loved one’s mutilated body after a self inflicted suicide by use of a gun. Based on the ethical dilemma at hand, my three points have proven that active voluntary and non-voluntary euthanasia should be a legal practice in the United States. One could object this, but I have proven my argument by the physiological and emotional pain one can endure when denied the right to die, by maintaining patients’ autonomy and dignity throughout the process, and by focusing on the quality of life for patients diagnosed with terminal illnesses. The long-standing ethical debate of euthanasia is decades old and will never have a perfect resolution, but one must take into account all sides of each argument to make an informed decision for their self. It is crucial that society remain open-minded regarding this issue. It is unethical to deny a person the right to die. Therefore, active voluntary and non-voluntary euthanasia should be made an approved and acceptable end of life medical practice in the United States.